CLC DLS: Scheduler
CLC DLS: Scheduler
The CLCDLS touch screen Scheduler provides 8 schedules to control any relays or groups in the lighting system. It also provides astronomical clock information, calculating sunrise and sunset times based on UTC and location. 8 additional lighting control groups are available for Common Area control or other grouping needs.
The device is powered off the same structured cabling which powers the CLCNS Network Switches, and provides a user interface into the network for configuring any device in the network independent of where it is located.
The CLCDLS can turn On and/or Off up to 60 individual relays or lighting control groups for each schedule, with scheduling exceptions or astro functionality. Any lighting control group in the network may enable or disable functionality based on time of day, by subscribing to any schedule. The dataline scheduler doubles as a user interface into the lighting network allowing the user to configure, edit and operate all switches, sensors, relays and remote schedules in the system. It can be mounted in the LCP or on a standard electrical wall box for mounting in the space. Each CLCDLS adds 8 schedules to the system, providing scalability for any advanced lighting application scenarios.
- 3.5" Full Color Touchscreen-Configuration interface for entire lighting network
- Astronomical clock functionality
- Communicating and powered from CAN lighting network
- 8 weekly schedules with up to 8 durations per day
- Single or recurring exceptions to each schedule
- Real time clock with Super-cap backup
32-bit ARM Processor with internal A/D, Flash and RAM
CAN Network @40k bps
Set via touchscreen
Address range: 1 to 99
Network/Power: (2) RJ45
Power 24 VDC
32° to 131°F (0° to 55°C), with enclosure
10-90% RH (non-condensing)
5 x 3 1/4 x 1 1/4 in. (12.7 x 8.3 x 2.6 cm) with housing
0.34 lb. (155g) with housing
UL 916 Pending