CLC Bnet: BACNet Gateway

BACNet Gateway

The GE Lighting BACnet™ Controller (CLCBnet) brings the CLC lighting system through to the BACnet protocol. The CLCBnet maps to the lighting system’s relays, switches, sensors, schedules, controls and dimming channels, and can provide control and schedule functionality to the system itself.

The CLCBnet is a fully programmable native BACnet® Building Controller. It supports multiple communications methods including, as standard, BACnet IP, BACnet over Ethernet and BACnet MS/TP.

Power Requirements

24VAC 50/60 Hz, 12VA

10-28VDC, 4.2W

Class 2

Ambient Ratings

32º to 131º F (0º to 55º C)

10 to 90% RH (non-condensing)

Communication Ports

CAN lighting network

Communications Speed @ 40 kbps

Maximum of 99 nodes per CAN segment


3-Port 10/100 Switch

BACnet IP, BACnet over Ethernet


BACnet MS/TP (Maximum of 99 subnet controllers)

Baud Rate: 9600, 19200, 38400, or 76800 bps (Default


BACnet PTP or TAP protocols, Baud Rate: 9600, 19200, or 38400(Default)


2 USB Host Ports


2 pushbutton switches (Reset; Transfer)


ARM9 32-bit RISC CPU at 240MHz

64MB flash memory

32 MB SDRAM memory

SD/SDIO card slot for memory expansion

Real-time clock (temperature compensated)

Ultracap power backup for RTC & memory

LED indication of CPU and scan status

Device Addressing

Set via software


Controller & Enclosure

5” x 5.4” x 2.6” (127 mm x 137 mm x 66 mm)

Weight (c/w Enclosure)

0. 34 lb. (155 g.) 

  • GE Lightsweep