DVC-322 PoE Power over Ethernet VAV Controller for Building Automation

The DVC-V322PoE is a fully programmable, native BACnet™, Advanced Application Controller for VAV applications featuring Power over Ethernet (PoE). PoE provides high speed communications and device power in a single cable, simplifying wiring and eliminating the need for a local control transformer.

The DVC-V322PoE supports BACnet IP, and BACnet over Ethernet protocols on its Ethernet port. It also supports a RS-485 subLAN of Delta LINKnet devices such as the BACstat line of smart network sensors and DFM I/O expansion modules.


The DVC-V322PoE is designed for VAV applications and includes an on-board actuator and airflow sensor in a direct mount integrated housing. The fully programmable DVC-V322PoE allows GCL+ programs and BACnet objects to be tailored to any VAV application.


  • Power Over Ethernet (PoE)
  • Native BACnet firmware
  • Fully Programmable
  • BACnet IP and/or BACnet over Ethernet Main LAN communications
  • Supports a RS-485 subLAN of Delta LINKnet smart network sensors and I/O expansion modules
  • Direct mount housing integrates controller, damper actuator and airflow sensor into a single package for easy, cost effective installation
  • Firmware upgrade and database load/save over the network
  • LED status indications for inputs, outputs, communication ports and power
  • Service Port
  • Optional field upgrade to Modbus RTU with hardware key
  • Local trending and alarming

BACnet Device Profile

BACnet Advanced Application Controller


Inputs - External


1 10 kΩ or Binary Input (10-bit)

2 Universal Inputs (10-bit), jumper configurable for:

0-5 VDC
0-10 VDC
10 kΩ Thermistor
4-20 mA

Dry Contact (using 10 kΩ Thermistor jumper setting)


Inputs - Internal


1 Air flow Input, true differential pressure sensor, use jumper to select

0 to 1 inH20 (0 to 248 Pa) or 0 to 2 inH2O (0 to 498 Pa)

1 power monitoring Input

1 Actuator position feedback input (optional)


Outputs - External


2 Universal Outputs
0-10 VDC @ 20 mA max per output 

Software configurable as binary or analog

2 Binary FET Outputs
24 VDC
Internally powered switching to ground


Outputs - Internal

2 Binary outputs for damper open/close

Damper Actuator

45 in-lbs. (nominal torque)

Less than 35db (A) noise level

Device Addressing

Software addressed


Removable screw-type terminal connectors

Wiring Class

NEC Class 2 / SELV

Flow sensor tubing must be ⁵⁄₃₂ in. inside diameter

PoE Power In


802.3 at PoE: 53 VDC, 25.5 W max*
802.3 af PoE: 48 VDC, 12.95 W max*


*See install guide for details on calculating PoE power budget.

24 VDC Power Out
802.3at PoE supply: 16.8 W (700 mA) max**
802.3af PoE supply: 7.2 W (300 mA) max**


**max total power available for external field devices powered from either 24VDC out terminal or binary outputs 1 and 2.



16-bit processor
2 MB Flash memory
319 KB SDRAM memory
Real-time clock
Super Capacitor for 72-hour backup of real-time clock and SRAM


Communications Ports

Ethernet (10-BaseT)

BACnet IP, BACnet over Ethernet


RS-485 NET2
Delta LINKnet up to 76800 bps, max 4 devices on LINKnet with no more than 2
DFM devices 

Optional Modbus up to 38400 bps, max 5 devices


32° to 131°F (0° to 55°C)

10 - 90% RH (non-condensing)

Dimensions (L x W x H)

9.3 x 5.0 x 3.7” (23.6 x 12.6 x 9.3cm)

1.7 lb. (772 g)





UL 916 Listed
BTL Listed

Building Operating Management Award 2014