eBMGR / eBMGR-TOUCH
eBMGR / eBMGR-TOUCH
The enteliBUS™ Manager (eBMGR) is a fully programmable native BACnet™ Building Controller. It supports multiple communications methods including, as standard, BACnet/IP, BACnet over Ethernet, BACnet MS/TP, and Delta LINKnet™.
The Manager is the automation engine of the enteliBUS Control System. It contains the primary CPU, memory storage, and external communication ports. The Manager also provides the control logic for enteliBUS I/O expansion backplanes.
An optional integrated LCD touchscreen provides local interface capabilities.
The enteliBUS Control System is made up of multiple modular components that are selected to meet the exact needs of a wide range of HVAC and Access control applications.
The eBMGR has multiple applications. By itself, it is a powerful system manager/BACnet router. With expansion backplane(s) attached, the eBMGR functions as an expandable I/O controller.
Use the enteliBUS Control System in low to medium density I/O applications to control a single piece of equipment, such as an AHU or chiller. Use it in high density I/O applications to control an entire mechanical room or central plant.
- Native BACnet firmware
- Fully programmable
- BACnet Ethernet, BACnet/IP and BACnet MS/TP comm. ports
- Integrated LCD touchscreen interface (optional)
- Modular, expandable I/O
- Advanced fault detection & diagnostics
- SD card memory expansion
- Firmware upgrade & database load/ save over the network
- LED status indications of power/scan and Ethernet ports
- Small footprint, DIN rail mountable
- Modular design provides flexibility, ease of service, and reduced cost for future upgrades
BACnet Device Profile
BACnet Building Controller (B-BC)
ARM9 32-bit RISC CPU
64 MB flash memory
32 MB SDRAM memory
SD/SDIO card slot for memory expansion
Real-time clock (temperature compensated)
Ultracap power backup for RTC & memory
LED indication of CPU and scan status
3 Port 10/100 Ethernet Switch.
BACnet/IP and BACnet over Ethernet protocols supported.
2 RS-485 Ports (up to 76800 bps).
BACnet MS/TP, Delta LINKnet, and Modbus protocols supported.
2 USB host ports
LCD Touchscreen (Optional)
4.3” Active Matrix Touchscreen
16bit Color, 480x272 resolution
BACnet address set via software
Removable screw-type terminal connectors
Class 2 / SELV
24VAC 50/60Hz, 12VA
0° to 55°C (32° to 131°F)
10 - 95% RH (non-condensing)
14.5 x 14 x 10cm (5 3/4 x 5 1/2 x 4“)
Snap mounts to standard 35mm DIN rail
Enclosure Protection Rating