The DNT-T103 is an intelligent room thermostat with a custom 3-value, 96 segment, LCD display. The DNT-T103 can communicate directly on a BACnet™ MS/TP network. The DNT-T103 can display a wide-range of digital or analog values including setpoints, temperature, airflow, heating and cooling status, fan speed, valve and damper position, and more. When connected on a BACnet MS/TP network, the DNT-T103 functions as an independent BACnet thermostat. When connected to a Controller, on a LINKnet network, the DNT-T103 provides a programmable remote sensor and expanded I/O capabilities.


The DNT-T103 is designed to be a low-cost solution for control of unitary equipment. It has built-in, configurable algorithms for VAV, VVT, fan coil/unit ventilator, heat pump, radiation and humidification applications. The DNT-T103 may also be connected to a LINKnet network to provide programmable remote sensor and expanded I/O capabilities.


  • Native BACnet™ firmware
  • BACnet MS/TP
  • Configurable 3-value, 96 segment, LCD display (with optional backlighting)
  • 4 Configurable push buttons
  • Controller firmware can be flash loaded over the network
  • Network termination  is jumper selectable  on each device
  • Derived Network Addressing  (DNA) for simple integration into a standard network architecture
  • Field selectable  applications
  • Service port

BACnet Device Profile

BACnet Application Specific Controller(B-ASC)


3-value and various icons (96 total segments) with optional backlighting

Push Buttons

4 stylized momentary push buttons

Temperature Sensor

Thermistor Input - 10k½ at 77°F (25°C)

Accuracy +/-0.36°F from 32-158°F (+/- 0.2°C from 0-70°C)

Display resolution of 0.1°

Stability 0.24°F over 5 years (0.13°C)

Humidity Sensor

Accuracy of +/- 3%RH from 20% -80% RH

(linearized accuracy of +/- 3% to +/- 5% from

0-20% and 80-100% RH)

Display Resolution of 0.1%

Stability of < 0.5% RH/yr (typical)


1 Universal input - 10 bit (supporting 0-5v,

0-10v, 10k½)


3 Binary triac outputs (supporting binary,

PWM or tri-state)


32-bit processor with internal A/D, Flash and


Device Type

Configured as a LINKnet or subnet device

Device Addressing

Set via keypad

Communications Ports

BACnet MS/TP @ 9600, 19200, 38400 or 76800 bps (maximum of 99 devices per BACnet MS/TP segment)


Screw-type terminal connectors

Wiring Class

Class 2


24V AC

41 VA (with internally powered outputs)


32° to 104°F (0° to 40°C)

10 - 90% RH (non-condensing)


5 x 3.25 x 1 in. (12.7 x 8.3 x 2.5 cm) with housing

0.3 lb. (134 g) with housing


UL 916 Listed

UL 864 Listed (DNT-T103-UL864 only)

BTL Listed



FCC Class B