The enteliBUS Controller (eBCON) is a fully programmable native BACnet® Building Controller. The Controller supports multiple communications methods including, as standard, BACnet/IP, BACnet over Ethernet, BACnet MS/TP and Delta LINKnet.
The Controller integrates the functions of the enteliBUS Manager and the enteliBUS Expander into a single compact module. This single module contains the primary CPU, memory storage, external communication ports, and direct I/O control for up to 4 enteliBUS I/O Modules.
The Controller comes bundled with a controller backplane that holds up to 4 I/O Modules. A connector on the backplane allows for further I/O expansion. Up to 8 backplanes (and associated I/O modules) can be controlled from a single enteliBUS Controller module.
The enteliBUS Control System is a fully programmable native BACnet control platform. It is scalable and therefore costeffective over a wide range of applications, from low-density distributed control to high-density centralized I/O applications.
Used together with enteliBUS I/O modules, the eBCON is a small footprint controller perfect for applications with limited mounting space. It can be expanded with additional backplanes/ modules for high-density I/O applications.
- Native BACnet firmware
- Fully programmable
- BACnet Ethernet, BACnet/IP, and BACnet MS/TP communication ports
- Modular, expandable I/O
- Advanced fault detection & diagnostics
- SD card memory expansion
- Firmware upgrade & database load/ save over the network
- LED status indications of power/ scan and communication ports
- Small footprint, DIN rail mountable
- Modular design provides flexibility, ease of service, and reduced cost for future upgrades
BACnet Device Profile
BACnet Building Controller (B-BC)
ARM9 32-bit RISC CPU
64 MB Flash memory
32 MB SDRAM memory
SD/SDIO card slot for memory expansion
Real-time clock (temperature compensated)
Ultracap power backup for RTC & memory
BACnet/IP & BACnet over Ethernet protocols supported.
RS-485 Port (up to 76800 bps). BACnet MS/TP, max 99 devices per port
Delta LINKnet up to 76800 bps, max 12 devices on LINKnet with no more than 2 DFM devices
USB Host Port
BACnet address set via software
Removable screw-type terminal connectors
Class 2 / SELV
24 VAC 50/60 Hz @ 6 VA
100 VA max with fully loaded I/O modules
*eBCON supplies power for up to 4 I/O Modules via the Controller Backplane.
0° to 55°C (32° to 131°F)
10 - 95% RH (non-condensing)
5.0 x 5.7 x 4.0 in. (12.6 x 14.5 x 10.0 cm)*
*Dimensions given are for eBCON package with controller Backplane.
Backplane: Snap mounts to standard 35mm DIN rail
eBCON: Snap mounts to Backplane & DIN rail assembly
0.820 lb (372 g)
Enclosure Protection Rating
UL 916 Listed
UL 864 Listed for UL 864 product numbers