DFC-322-R3
Description: The DFC-322R3-240 is a fully programmable, Native BACnet™ Advanced Application Controller that communicates on an RS-485 LAN using the BACnet MS/TP protocol. Direct 240 VAC line voltage terminal connections are provided for 1, 2 or 3 speed fans. Room temperature can be a standard 10KΩ sensor or BACstat II, connected via a secondary LINKnet network and a 24 VAC power out connection.
Features:
- Native BACnet firmware
- BACnet MS/TP communications
- Stand alone operation or on BACnet
- Fully programmable in GCL+
- Pre-loaded fan coil application database
- Direct connection to BACstat II (DNS-24 or DNS-24L)
- Direct connection for up to 2 tri-state valve Actuator
- 3 relays rated for motor loads to control 1-, 2- or 3-speed fans, complete with interlocks and time delays for equipment protection
- Slim design fits into narrow fan coil units
- Power supplied by power mains (on-board 24 VAC transformer included)
- Derived Network Addressing (DNA) for simple integration into a standard network architecture
- Service port
Application: The DFC-322R3-240 is designed for fan coil control. With 2 triac outputs and 2 analog 0-10v outputs, it covers a wide-range of fan coil untit applications.
The DFC-322R3-240 allows for sequence modifications as required by the design engineer or building owner. It provides simple, easy-to-install fan coil control solutions for office buildings, hotels or residential buildings.
Accessories:
- DNS-24L-FAN—Delta Network Sensor (LINKnet only) with Fan Keys
- RPT-768—Delta Network Repeater for BACnet MS/TP
- TRM-768—Delta Network Terminator for BACnet MS/TP
- CON-768—Delta Network Converter
Ordering: Order the Delta Fan Coil Controller according to the following product number:
BACnet Device Profile
BACnet Advanced Application Controller (B-AAC)
Inputs
2 Universal inputs - 10 bit (supporting 0-5v, 0-10v, 10kΩ, 4-20mA)
1 10kΩ or dry contact input - 10 bit
Outputs
2 Analog outputs (0-10v)
2 Binary triac outputs
3 Binary relay outputs for fan speed control
240 VAC, 1HP (60 LRA/10 FLA)
LED status indication of each output
Technology
1 MB (8 megabit) Flash memory
127 KB SRAM memory for database
CPU status LED
Device Type
Pre-configured as a subnet device
Device Address
Set via DIP switch and jumpers or software setup
Communication Ports
Main LAN (NETI)
BACnet MS/TP @ 9600, 19200, 38400 or 76800 bps (default) (maximum of 99 devices per BACnet MS/TP segment)
SubLAN (NET2)
Delta LINKnet @ 76800 bps (maximum 4 devices on LINKnet, with no more than 2 DFM/DNT devices per controller)
Note: On board transformer only provides enough power for 1 BACstat
Connectors
Fixed screw-type terminal connectors (Class 1)
Removable screw-type connectors (Class 2)
Wiring Class
NEC Class 1 (power in)
NEC Class 2, SELV (power out)
Power
Power In:
240 VAC, 50/60 Hz
2000 VA maximum
(30 VA for internal circuitry)
Power Out (for DNS-24L):
24 VAC, 50/60 Hz, 3 VA
Ambient
0º to 45º C (32º to 113º F)
10 to 90% RH (non-condensing)
Dimensions
24.13 cm x 10.0 cm x 6.96 cm
(9.5 x 3.94 x 3.75 in.)
955 g (2.1 lb.)
Compliance
CE—EMC Directive 89/336/EEC & IEC 61010-1
FCC Class B
ICES Class B