ADM-2W704
Description: The ADM-2W704 is an intelligent device used for access control of two single-direction doors, or one bi-directional door. When connected to an Access System Manager (ASM) on the Delta LINKnet network, it provides remote, fully programmable, door access control and expanded I/O capabilities.
Features:
- Controls two single-direction doors or one bi-directional door
- 2 Weigand input ports per board
- Can operate under a degraded mode of operation in the event of communication failures
- Communicates on LINKnet
- Configurable Wiegand card format up to 64 bits
- All external inputs can be monitored to give status of the input wiring using EOL devices (Types 1, 2, 3, 4)
- Easy-to-mount housing
- Designed for easy field wiring
- Equipped with battery charging circuit
Application: The ADM-2W704 is designed for access control of 2 single direction doors or 1 bi-directional door. Up to twelve door modules may be connected to an Access System Manager (ASM-24E) via LINKnet. The ADM-2W704 is equipped with a built-in battery charging circuit to provide optional battery backup for the Controller, all of its peripheral equipment (i.e. CardReaders, Door strikes, and Maglocks) and the Access System Manager when the AC power fails. All external inputs can be monitored for wiring status using EOL devices (Types 1, 2, 3, 4), which give trouble indication as well as normal and alarm conditions.
Accessories:
- SR-2400—Sentinel-Prox SR-2400 4 to 5.5 inch Read Range, Metal Compensated, Indoor/Outdoor
- MM-6800—Sentinel-Prox MM-6800 6 to 8 inch Read Range, Metal Compensated, Indoor/Outdoor
- SP-6820—Sentinel-Prox SP-6820 6 to 8 inch Read Range, Single Gang Box Mount
- MR-1824—Sentinel-Prox MR-1824 18 to 24 inch Read Range, Dimensions Only 8”x 8” x 1”, Indoor/Outdoor
- MR-1824MC—Sentinel-Prox MR-1824 MC Metal Compensated Version
- Prox-Linc–GR Graphics Quality, both sides, ISO Compliant
- Prox-Linc–GR-Graphics Quality ISO with 3 track High-CO ABA Magnetic Stripe
- Prox-Linc–CS-Clam Shell style Prox Badge, Pre-Punched in Portrait Orientation
- Prox-Linc–KT-Proximity Key Tag (Key Fob)
Ordering: Order the ADM-2W704 with the desired options according to the following product number:
Card Reader
2 Wiegand services (card reader, keypad, biometric device, etc.)
Inputs
EOL supervised inputs (Types: 1, 2, 3, 4)
2 Door contacts
2 Request-to-exit switches
2 Auxiliary (i.e. tamper from Card Reader, motion detector – used in access/security,etc.)
1 Tamper switch
Outputs
2 Doorstrike/maglocks, Form C Relay
5A @ 24VDC/AC, MOV protection. +12VDC @ 500mA available for each lock (lock power protected, internally wired and monitored)
4 LED driver, open-controller current sink @ 50mA, 24VDC maximum, current limited, (LED or Buzzer driver)
2 Auxiliary relays, Form C Relay
5A @ 24 VDC/AC, MOV protection
Output Voltages
2 Card reader +5VDC @ 50 mA each, (0.10A total) each individually fused with a resettable fuse
2 Card reader +12VDC @ 160mA each, (0.32A total) each individually fused with a resettable fuse
1 Auxiliary +12VDC @ 50mA, fused with a resettable fuse
1 DC Power out +10 to +15VDC @ 0.25A fused with a resettable fuse
Device Type
LINKnet device only
Communications Ports
Delta LINKnet @ 76800 bps (maximum 12 door modules per ASM-24E)
Device Address
Set via Address DIP switches (standard device address range: 0 to 12 on LINKnet)
Connectors
Removable screw-type terminal connectors
Wiring Class
Class 2
Power
24 VAC @ 75VA
Note: transformer must not be shared with any other products
Ambient
32º to 131ºF (0º to 55ºC)
10 to 90% RH (non-condensing)
Dimensions
8 x 9.5 x 2.5 in.
(20.3 x 24.1 x 6.4 cm) with housing
1.49 lb. (680 g) with housing
Compliance
CE
FCC