CLC RMX6: Relay Module
The CLCRMx6 Relay Module will connect up to six RR style relays to the modular lighting control system. Supports relays with or without feedback with LED status indication and pushbutton toggle operation.
The CLCRMS6 has six switch input terminals with pilot light operation for relays which have the optional feedback, or jumper selectable locator light operation for those without.
The CLCRMx6 provides control of up to six relays per module allowing a lighting panel to be built up based on the number of relays the panel requires and reducing costs. This also allows for simple expansion of a panel to add in additional modules and relays until the panel capacity is reached.
The RMS6 version of the module has six 2-position (On/Off) terminals with pilot/locator functionality. These terminals allow for 3-wire and 2-wire Momentary and Maintained switch operation based on how the switches are wired to the terminals.
- Controls up to 6 relays with or without feedback
- Optional relay control via 6 hardwired switch inputs
- Pushbutton programming capable for basic operation
- Color-coded spring-type terminals for switch wiring
- Toggle relay state via pushbutton
- Jumper selectable for Pilot or Location switch functionality
- Communicating on CAN lighting network
6 2-position closed-contact switch inputs (Optional)
6 closed-contact feedback inputs
6 2-position 24VAC pulse relay outputs
6 pilot/locator light outputs (Optional)
32-bit ARM Processor with internal A/D,
Flash and RAM
CAN Network @40k bps
Set via rotary dials
Address range: 1 to 99
Inputs: spring-clip terminal connectors
Outputs: 5-pin MTA
(2) 4-pin MTA
32° to 131°F (0° to 55°C), with enclosure
10-90% RH (non-condensing)
5 1/2 x 4 3/4 x 1 1/8 in. (14 x 12.1 x
2.9 cm) with housing
0.34 lb. (155g) with housing
UL 916 Pending