DSC-1180
Description: The DSC-1180 is a fully programmable, Native BACnet™ Building Controller that communicates on an RS-485 LAN using the BACnet MS/TP protocol. The DSC-1180 is designed for a wide-range of applications that have medium local I/O requirements. It also supports BACstats and other Delta LINKnet devices.
Features:
- Native BACnet firmware
- Serial port for modem connection
- BACnet MS/TP communications
- Super capacitor for Real-time clock and SRAM backup (requires no maintenance)
- Supports 12 BACstat network sensors on LINKnet for room sensing and control or 2 Delta Field Modules on LINKnet for I/O expansion
- Actuator power terminal (24VAC) for each analog output
- Fully programmable in GCL+
- Application database can be flash loaded over the network
- Controller firmware can be flash loaded over the network
- Supports modbus capability by flash loading in the field via hardware key
- Derived Network Addressing (DNA) for simple integration into a standard network architecture
- Service port
Accessories:
- RPT-768—Delta Network Repeater for BACnet MS/TP
- TRM-768—Delta Network Terminator for BACnet MS/TP
- CON-768—Delta Network Converter
Ordering: DSC products with V3.30 firmware or later can not be flashed down to V3.22. To order product with V3.22 firmware append -V322 to the product name. Order the DSC-1180 with the desired options according to the following product numbers:
- DSC-1180—11 inputs, 8 AO’s
- DSC-1180-V2-—11 inputs, 8 AO’s (V2* Firmware)
- DSC-1180-V322—11 inputs, 8 AO’s (V3.22* Firmware)
*Not all features described are available when this option is selected.
BACnet Device Profile
BACnet Building Controller (B-BC)
Inputs
11 Universal inputs - 10 bit (supporting 0-5v, 0-10v, 10kΩ, 4-20mA)
Outputs
8 Analog outputs (0-10v)
LED status indication of each output
Technology
32-bit processor
2 MB (16 megabit) Flash memory
319 KB SRAM memory for database
LED indication of CPU and SCAN status
Real-time clock
Super capacitor for 72-hr backup of real-time clock and SRAM
Device Type
Configured as either a System or Subnet device
Device Address
Set via DIP switch and jumpers or software setup
Communications Ports
Main LAN (NETI)
BACnet MS/TP @ 9600, 19200, 38400 or 76800 bps (default) (maximum of 99 devices per BACnet MS/TP segment)
SubLAN (NET2)
Delta LINKnet @ 76800 bps (maximum 12 devices on LINKnet, with no more than 2 DFM devices
Serial RS-232 BACnet PTP 9600, 19200 or 38400 bps
Connectors
Removable screw-type terminal connectors
Wiring Class
Class 2
Power
24 VAC only
20VA
Ambient
32° to 131°F (0° to 55°C)
10 - 90% RH (non-condensing)
Dimensions
10⅜ x 4 x 1⅞ in. (26.4 x 10.2 x 4.8 cm) with housing
1.062 lb. (482 g) with housing
Compliance
CE
FCC
Listings
C-UL Listed
UL 916 Listed
BTL Listed